RP Export for Solid Edge is an add-in for Solid Edge

Installation:
=============
The installer adds RP Export for Solid Edge to the list of available add-ins installed for Solid Edge. To verify whether RP Export for Solid Edge has been properly loaded into Solid Edge invoke the "Add-In Manager" by clicking on the "Applications" menu, then "Add-Ins" and finally "Add-In Manager". Verify that "RP Export for Solid Edge" is present in the list of "Available Add-Ins" and make sure that its check box is checked.

If "RP Export for Solid Edge" cannot be found in the list of "Available Add-ins", then you will have to manually load the add-in into the Solid Edge environment. This can be done by closing all Solid Edge sessions and clicking the "Manually Load Add-in" shortcut placed in the Start Menu (Start -> Programs -> SYCODE -> RP Export for Solid Edge -> Manually Load Add-in".

Now RP Export for Solid Edge is ready for use.

Usage:
======
RP Export for Solid Edge adds new commands to Solid Edge. It also adds a submenu to the Solid Edge menu called "RP Export for Solid Edge" containing these new commands. This submenu is located in the Applications -> Add-Ins submenu. Simply click on the menu items in this sub menu to run these new commands.

The new commands are:
1) Export - Exports a RP file
2) Help - Display the RP Export for Solid Edge help file
3) Web - Visit the RP Export for Solid Edge web site
4) About - Display the RP Export for Solid Edge about box

Note: The "RP Export for Solid Edge" submenu is available only when a document (part, assembly, etc.) is open. This is due to the way Solid Edge is designed.

Support:
========
For support, please E-Mail support@sycode.com